Jamstvo: 24 mjeseca

– 5 GHz PtMP LTU Client with advanced RF performance, functions in a PtMP environment with the LTU-Rocket as the BaseStation
– Incorporating innovative industrial design with advanced technology, the LTU Pro is a Point-to-MultiPoint (PtMP) 5 GHz high-performance subscriber station
– Based on Ubiquiti’s proprietary LTU technology, the LTU Pro is not impeded by the limitations of standard 802.11 Wi-Fi technology
– It features an integrated high-gain dish for long range and high performance
– Channel width flexibility (10/20/30/40/50 MHz) allows independent TX and RX channel frequency configurations anywhere within the radio band to avoid local interference

OVERVIEW
– Featuring an integrated 24 dBi dish antenna, the LTU Pro is a 5 GHz subscriber station that functions as a CPE (Customer Premises Equipment) in a Point-to-MultiPoint (PtMP) environment with the LTU Rocket as the basestation

PROPRIETARY LTU TECHNOLOGY
– Based on Ubiquitis LTU technology, the LTU Pro is not impeded by the limitations of standard 802.11 Wi-Fi technology
– Its custom LTU silicon and radio architecture provide up to 600+ Mbps (1+ Gbps with future firmware upgrade) of real TCP/IP throughput and modulation rates of up to 4096QAM (Available with future firmware upgrade)

CPE MODES
– The LTU Pro supports both bridged and built-in hardware NAT router modes to suit your specific deployment

FREQUENCY SPLIT
– The LTU Pro can use different frequencies for TX and RX to avoid interference

Features
– PtMP CPE
– 1024 QAM
– 10/20/30/40/50 MHz channel bandwidth
– Central configuration management from AP side
– Frequency split
– Automatic power adjustments
– Router mode support

Specifications
– Networking Interface: 1× 10/100/1000 Ethernet Port
– Enclosure: Outdoor UV Stabilized Plastic
– Max. Power Consumption: 9W
– Power Supply: 24V, 0.5A Gigabit PoE Adapter (Included)
– Power Method: 24V Passive PoE (Pairs 4, 5+; 7, 😎
– Voltage Range: 22 -26V
– Max. Conducted TX Power: 22 dBm (per Chain)
– Gain: 24 dBi
– Beamwidth: 14 degree
– Sidelobe Level: -10 dB
– Front-to-Back Ratio: 27 dB
– Mounting: Pole-Mount (Kit Included)
– Wind Loading: 150 N @ 200 km/h (33.72 lbf @ 125 mph)
– Wind Survivability: 200 km/h (125 mph)
– ESD/EMP Protection: +/- 24kV Contact/Air
– Operating Temperature: -40C to 60C (-40F to 140F)
– Operating Humidity: 10% – 90% Noncondensing
– Certifications: CE, FCC, IC
– Dimensions: 316.5×316.5×174.3 mm
– Weight: 1.3 kg

Ukoliko proizvod nije dostupan, onda je u dolasku i sve možemo nabaviti. Samo nam pošaljite upit.