Jamstvo: 24 mjeseca

ULTIMATE WIRELESS EXPERIENCE FOR HIGH-DENSITY WITH TRUE FLEXIBILITY
– The WAC6303D-S has been designed with Smart Antenna technology, to provide clients with the ultimate wireless experience, especially in high-density environment
– Additionally the WAC6303D-S supports NebulaFlex Pro which includes one year of Professional pack and triple mode functionality (standalone, hardware controller and Nebula)

MU-MIMO, NEW DEFINITION OF Wi-Fi
– Stepping up from 802.11ac, the second generation Wave 2 technology introduces Multi-User MIMO (MU-MIMO)
– This is an important WiFi development that enables an AP to communicate with multiple clients at a time offering 300% performance for a 3×3 AP

NEXT GENERATION TRANSMIT BEAMFORMING BENEFITS OVERALL NETWORKING
– Transmit Beamforming (TxBF) technology is another key to implement reliable high-density Wi-Fi connection
– It increases overall network transmission data rates, which benefits not only MU-MIMO clients but also all existing clients

OPTIMAL WIRELESS EXPERIENCE
– WAC6303D-S features Smart antenna technology which is proven able to mitigate co-channel interference, and adaptively adjust antenna patterns to fit in high-density application

BULIT FOR SUPERIOR PERFORMANCE
– The WAC6303D-S is built with a high-efficiency antenna module, premium power amplifiers and low-noise elements delivering superior wireless performance over other Wave 2 access points on the market

OPTIMIZED WIRELESS EXPERIENCE WITH ADVANCED FEATURES
– To provide outstanding performance in crowded environment, WAC6303D-S features 3G/4G interference immunity, excellent receive sensitivity and DCS, which enlarge its service coverage for more clients and better quality of connection

MANAGE IT YOUR WAY !
– The WAC6303D-S comes with the support of NebulaFlex Pro, which offers the full flexibility for users to easily switch between Zyxel Nebula cloud-managed, controller-managed, and standalone modes
– You can choose the appropriate managed-mode best suited for your needs

Specifications
RF SPECIFICATIONS
– 802.11n/ac premium features:
* 2.4GHz: 2×2 MIMO with two spatial stream (SU-MIMO)
* 5GHz: 3×3 MIMO with three spatial stream (SU-, or MU-MIMO)
* 802.11ac beamforming (transmit beamforming)
* Maximal ratio combining (MRC)
* Low End Sensitivity Improvements (LESI)
* Time Domain Channel Smoothing
* 20-, 40- and 80-MHz channels
* PHY data rates total up to 300 Mbps (11n) + 1300 Mbps (11ac)
* Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
* Cyclic Delay diversity (CSD) support
* Maximum Likelihood Demodulation (MLD) support
* Low Density Parity Check (LDPC) support
– Typical transmit output power:
* 2.4 GHz: 20 dBm
* 5 G GHz: 26 dBm
– Antenna gain:
* 2.4 GHz: 3 dBi; 2×2 MIMO
* 5 GHz: 4 dBi 3×3 MIMO
– Support data rate:
* 802.11a/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
* 802.11n: up to 300 Mbps in MCS15 (40MHz; 2 Spatial Streams; GI=400ns)
* 802.11ac:up to 1300 Mbps in MCS9 (80MHz; 3 Spatial Streams; GI=400ns)
– Receive sensitivity: Min. Rx sensitivity up to -103 dBm

INTERFACES
– Number of 10/100/1000M LAN: 2× switch ports
– Console port: 4-Pin serial
– Input power requirements: Direct DC power or Power over Ethernet (PoE) ×2
– PoE:
* 802.3at (full mode)
* 802.3af (Restrict 2.4G & 5G radio to one transmit stream only)
– PoE power draw: 16.2W (802.3at PoE)

WLAN
– WLAN maximum throughput: Up to 1600 Mbps
– Fast roaming: Pre-authentication and PMK caching
– Wireless Security:
* WPA/WPA2-PSK
* WPA/WPA2-Enterprise
* WLAN access control list
* EAP type
* IEEE 802.1X
* MAC filtering
* Web authentication
* Layer-2 isolation
* RADIUS authentication
* Microsoft AD authentication
* LDAP authentication
* MAC authentication
* Rogue AP detection
– Number of SSID: 16
– QoS: WMM, WMM power save, U-APSD, DiffServ marking

NETWORK
– IPv6 support: Yes
– VLANs: Yes
– DHCP client: Yes

MANAGEMENT
– Operating mode:
* Nebula Cloud managed
* Controller-managed
* Standalone
– ZON Utility:
* Discovery of Zyxel switches, APs and gateways
* Centralized and batch configurations: IP configuration, IP renew, Device factory reset, Device reboot, Device locating, Web GUI access, Firmware upgrade, Password configuration, One-click quick association with Zyxel AP Configurator (ZAC)
– Smart Connect:
* Neighbor device discovery
* One-click remote management access to the neighboring Zyxel devices
– Zyxel AP Configurator:
* Batch AP configuration
* Batch AP firmware upgrade
* Batch AP profile backup
– Zyxel Wireless Optimizer:
* WiFi AP planning
* WiFi coverage detection
* Wireless health management
– Standalone AP mode: Yes
– Managed AP mode: Yes
– CLI: Yes
– SNMP: v2c/v3

STANDARD COMPLIANCE
– Ethernet:
* IEEE 802.3
* IEEE 802.3u
*IEEE 802.11ab
* IEEE 802.3au
* IEEE 802.3az
* IEEE 802.3af/at
– PoE: IEEE 802.3af/at
– WLAN:
* 802.11b: DBPSK, DQPSK, CCK
* 802.11g: BPSK, QPSK, 16-QAM, 64-QAM
* 802.11a: BPSK, QPSK, 16-QAM, 64-QAM
* 802.11n: BPSK, QPSK, 16-QAM, 64-QAM
* 802.11ac: BPSK, QPSK, 64-QAM, 256-QAM

CERTIFICATIONS
– Radio: FCC Part 15C, FCC Part 15E, ETSI EN 300 328, EN 301 893, LP0002, EN 60601-1-2
– EMC: FCC Part 15B, EN 301 489-1, EN 301 489-17, EN55032, EN55024, EN61000-3-2/-3, BSMI CNS13438
– Safety: EN 60950-1, IEC 60950-1, BSMI CNS14336-1

PHYSICAL
– Dimensions (W×D×H): 211×223×39 mm
– Weight 800 g
– Included accessories: Wall/ceiling mount plate
– Plenum rating: Yes
– Kensington lock support: Yes
– Power supply:
* Input: AC 100-240V, 50~60Hz
* Output: DC +12V 2A (Sold separately)
– MTBF: 3.960.217 hours

ENVIRONMENTAL
– Operating:
* Temperature: -20C to 60C / -4F to 140F
* Humidity: 10% to 90% (Non-condensing)
– Storage:
* Temperature: -40C to 70C / -40F to 158F
* Humidity: 10% to 90%

Ukoliko proizvod nije dostupan, onda je u dolasku i sve možemo nabaviti. Samo nam pošaljite upit.